STEP 1

Place jamb bracket on door jamb, at desired height. Firmly hold the bracket against inside edge of the jamb.
Mark screw holes through the bracket onto door jamb, then drill pilot holes into the jamb. Install jamb bracket using enclosed 1-1/2” screws.

Position latch on the door, hold in place and mark mounting holes from latch onto the door.

Remove the latch and drill pilot holes into door, 1/2” deep.

Install latch on the door using enclosed 3/4” screws

STEP 2

STEP 3

Install the cover plate by pushing firmly side to side, until plate snaps completely into place and is flush with the latch.

Done!